Different types standard high pressure hydraulic hose with special specifications

We can supply standard high pressure hydraulic hose including high-pressure hose EN 853 1SN, 2SN, 4SP, 4SH, SAE 100R13 and R15.

They are used as flexible hoses in the hydraulic systems of machines and mechanisms for the transportation of mineral and hydraulic oil, fuel oil and water-oil emulsions. High pressure hydraulic hoses are also used in logging, road-construction, agricultural, mining and oil and gas industries.

EN 853 1SN High Pressure Hydraulic Rubber Hose

Construction

  • Tube: high quality synthetic rubber compounds.
  • Reinforcement: one-braid high tensile steel wire.
  • Cover: abrasion and weather resistant synthetic rubber.
  • Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
A drawing of EN 853 1SN high pressure hydraulic hose with one-braid high tensile steel wire.

HPH-01: EN 853 1SN high pressure hydraulic hose drawing.

A EN 853 1SN hydraulic hoses shows section structure.

HPH-02: EN 853 1SN high pressure hydraulic hose with one-braid high tensile steel wire reinforcement.

Table 1: EN 853 1ST/1SN Steel Wire Reinforced Hydraulic Rubber Hose Technical Specification
Item Size SAE Size I.D. Reinforcement W.D. O.D. Max. W.P. Proof Pressure P.P. Min. B.P. Min. B.R. Weight
A AT
mm inch dash min. max. min. max. min. max. max. MPa psi MPa psi MPa psi mm kg/m
EN8531S-01 5 3/16 -3 4.6 5.4 9.0 10.0 11.9 13.5 12.5 25 3625 50 7250 100 14500 90 0.20
EN8531S-02 6.3 1/4 -4 6.2 7.0 10.6 11.6 15.1 16.7 14.1 22.5 3260 45 6525 90 13050 100 0.25
EN8531S-03 8 5/16 -5 7.7 8.5 12.1 13.3 16.7 18.3 15.7 21.5 3120 43 6235 85 12325 115 0.31
EN8531S-04 10 3/8 -6 9.3 10.1 14.5 15.7 19.0 20.6 18.1 18 2610 36 5220 72 10440 130 0.36
EN8531S-05 12.5 1/2 -8 12.3 13.5 17.5 19.1 22.2 23.8 21.4 16 2320 32 4640 64 9280 180 0.45
EN8531S-06 16 5/8 -10 15.5 16.7 20.6 22.2 25.4 27.0 24.5 13 1885 26 3770 52 7540 200 0.52
EN8531S-07 19 3/4 -12 18.6 19.8 24.6 26.2 29.4 31.0 28.5 10.5 1520 21 3045 42 6090 240 0.65
EN8531S-08 25 1 -16 25.0 26.4 32.5 34.1 37.1 39.1 36.6 8.8 1280 17.5 2540 35 5075 300 0.91
EN8531S-09 31.5 1-1/4 -20 31.4 33.0 39.3 41.7 44.4 47.6 44.8 6.3 910 15 2175 25 3625 420 1.30
EN8531S-10 38 1-1/2 -24 37.7 39.3 45.6 48.0 50.8 54.0 52.1 5 725 10 1450 20 2900 500 1.70
EN8531S-11 51 2 -32 50.4 52.0 58.7 61.7 65.1 68.3 65.5 4 580 8 1160 16 2320 630 2.00

EN 853 2SN High Pressure Hydraulic Rubber Hose

Construction

  • Tube: high quality synthetic rubber compounds.
  • Reinforcement: two-braid high tensile steel wires.
  • Cover: abrasion and weather resistant synthetic rubber.
  • Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
A drawing of EN 853 2SN high pressure hydraulic hose with two-braid high tensile steel wires.

HPH-03: EN 853 2SN high pressure hydraulic hose drawing.

A side view of EN 853 2SN hydraulic hose and we can see the spec on surface and section structure.

HPH-04: EN 853 2SN high pressure hydraulic hose has two-braid high tensile steel wires.

Table 2: EN 853 2ST/2SN Steel Wire Reinforced Hydraulic Rubber Hose Technical Specification
Item Size SAE Size I.D. Reinforcement W.D. O.D. Max. W.P. Proof Pressure P.P. Min. B.P. Min. B.R. Weight
A AT
mm inch dash min. max. min. max. min. max. max. MPa psi MPa psi MPa psi mm kg/m
EN8532S-01 5 3/16 -3 4.6 5.4 10.6 11.6 15.1 16.7 14.1 41.5 6020 83 12035 165 23925 90 0.32
EN8532S-02 6.3 1/4 -4 6.2 7.0 12.1 13.3 16.7 18.3 15.7 40 5800 80 11600 160 23200 100 0.36
EN8532S-03 8 5/16 -5 7.7 8.5 13.7 14.9 18.3 19.9 17.3 35 5075 70 10150 140 20300 115 0.45
EN8532S-04 10 3/8 -6 9.3 10.1 16.1 17.3 20.6 22.2 19.7 33 4785 66 9570 132 19140 130 0.54
EN8532S-05 12.5 1/2 -8 12.3 13.5 19.0 20.6 23.8 25.4 23.0 27.5 3990 55 7975 110 15950 180 0.68
EN8532S-06 16 5/8 -10 15.5 16.7 22.2 23.8 27.0 28.6 26.2 25 3625 50 7250 100 14500 200 0.80
EN8532S-07 19 3/4 -12 18.6 19.8 26.2 27.8 31.0 32.6 30.1 21.5 3120 43 6235 85 12325 240 0.94
EN8532S-08 25 1 -16 25.0 26.4 34.1 35.7 38.5 40.9 38.9 16.5 2390 32.5 4710 65 9425 300 1.35
EN8532S-09 31.5 1-1/4 -20 31.4 33.0 43.3 45.7 49.2 52.4 49.5 12.5 1810 25 3625 50 7250 420 2.15
EN8532S-10 38 1-1/2 -24 37.7 39.3 49.6 52.0 55.6 58.8 55.9 9 1305 18 2310 36 5220 500 2.65
EN8532S-11 51 2 -32 50.4 52.0 62.3 64.7 68.2 71.4 68.6 8 1160 16 2320 32 4640 630 3.42

EN 856 4SH High Pressure Hydraulic Rubber Hose

Construction

  • Tube: high quality synthetic rubber compounds.
  • Reinforcement: four-spiral high tensile steel wires.
  • Cover: abrasion and weather resistant synthetic rubber.
  • Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
A drawing of EN 856 4SH hydraulic hose with four-spiral high tensile steel wires.

HPH-05: EN 856 4SH high pressure hydraulic hose drawing.

Five pieces of EN 856 4SH hydraulic hose on the white background.

HPH-06: EN 856 4SH high pressure hydraulic hose with four-spiral high tensile steel wire.

Table 3: EN 856 4SH Steel Wire Spiraled Hydraulic Rubber Hose Technical Specification
Item Size SAE Size I.D. Reinforcement W.D. O.D. Max.W.P. Proof Pressure P.P. Min.B.P. Min.B.R. Weight
mm inch dash min. max. min. max. min. max. MPa psi MPa psi MPa psi mm kg/m
EN8564S-01 19 3/4 -12 18.6 19.8 27.6 29.2 31.4 33.0 42 6090 87 12180 168 24360 280 1.70
EN8564S-02 25 1 -16 25.0 26.4 34.4 36.0 37.5 39.9 38 5510 76 11020 152 22040 340 2.50
EN8564S-03 31.5 1-1/4 -20 31.4 33.0 40.9 42.9 43.9 47.1 32.5 4710 65 9425 130 18850 460 3.00
EN8564S-04 38 1-1/2 -24 37.7 39.3 49.8 49.8 51.9 55.1 29 4205 58 8410 116 16820 560 3.60
EN8564S-05 51 2 -32 50.4 52.0 64.2 64.2 66.5 69.7 25 3625 50 7250 100 14500 700 5.00

EN 856 4SP High Pressure Hydraulic Rubber Hose

Construction

  • Tube: high quality synthetic rubber compounds.
  • Reinforcement: four-spiral high tensile steel wires.
  • Cover: abrasion and weather resistant synthetic rubber.
  • Temperature: -40 °C to +100 °C (-40 °F to +212 °F).
A drawing of EN 856 4SP high pressure hydraulic hose with four-spiral of high tensile steel wires.

HPH-07: EN 856 4SP high pressure hydraulic hose drawing.

Three EN 856 4SP hydraulic hoses and we can see the section structure clearly.

HPH-08: EN 856 4SP high pressure hydraulic hose.

Table 4: EN 856 4SP Steel Wire Spiraled Hydraulic Rubber Hose Technical Specification
Item Size SAE Size I.D. Reinforcement W.D. O.D. Max.W.P. Proof Pressure P.P. Min.B.P. Min.B.R. Weight
mm inch dash min. max. min. max. min. max. MPa psi MPa psi MPa psi mm kg/m
EN8564SP-01 6.3 1/4 -4 6.2 7.0 14.1 15.3 17.1 18.7 45 6525 90 13050 180 26100 150 0.64
EN8564SP-02 10 3/8 -6 9.3 10.1 16.9 18.1 20.6 22.2 44.5 6450 89 12905 178 25810 180 0.75
EN8564SP-03 12.5 1/2 -8 12.3 13.5 19.4 21.0 23.8 25.4 41.5 6020 83 12035 166 24070 230 0.89
EN8564SP-04 16 5/8 -10 15.5 16.7 23.0 24.6 27.4 29.0 35 5075 70 10150 140 20300 250 1.10
EN8564SP-05 19 3/4 -12 18.6 19.8 27.4 29.0 31.4 33.0 35 5075 70 10150 140 20300 300 1.50
EN8564SP-06 25 1 -16 25.0 26.4 34.5 36.1 38.5 40.9 28 4060 56 8120 112 16240 340 2.00
EN8564SP-07 31.5 1-1/4 -20 31.4 33.0 45.0 47.0 49.2 52.4 21 3045 42 6090 84 12180 460 3.00
EN8564SP-08 38 1-1/2 -24 37.7 39.3 51.4 53.4 55.6 58.8 18.5 2680 37 5365 74 10730 560 3.40
EN8564SP-09 51 2 -32 50.4 52.0 64.3 66.3 68.2 71.4 16.5 2390 33 4785 66 9570 660 4.35

SAE 100 R13 High Pressure Hydraulic Rubber Hose

Construction

  • Tube: black, oil resistant, Neoprene (CR).
  • Reinforcement: multiple spiral piles of steel wires wrapped in alternating directions.
  • Cover: oil and weather resistant synthetic rubber.
  • Temperature: -40 °C to +120 °C (-40 °F to +250 °F).
A drawing of SAE 100R13 hydraulic hose shows six-spiral steel wires.

HPH-09: SAE 100R13 hydraulic hose drawing.

Three pieces of SAE 100R13 high pressure hydraulic hose with printed specs.

HPH-10: SAE 100R13 high pressure hydraulic hose.

Table 5: SAE 100 R13 High Pressure Hydraulic Rubber Hose Technical Specification
Item Size SAE Size I.D. Reinforcement W.D. O.D. Max.W.P. Proof Pressure P.P. Min.B.P. Min.B.R. Weight
mm inch dash min. max. min. max. min. max. MPa psi MPa psi MPa psi mm kg/m
HPHR13-01 19 3/4 -12 18.6 19.8 28.2 29.8 31.0 33.2 35 5075 70 10150 140 20300 240 2.10
HPHR13-02 25 1 -16 25.0 26.4 34.9 36.4 37.6 39.8 35 5075 70 10150 140 20300 300 2.88
HPHR13-03 31.5 1-1/4 -20 31.4 33.0 45.6 48.0 48.3 51.3 35 5075 70 10150 140 20300 420 4.20
HPHR13-04 38 1-1/2 -24 37.7 39.3 53.1 55.5 55.8 58.8 35 5075 70 10150 140 20300 500 5.00
HPHR13-05 51 2 -32 50.4 52.0 66.9 69.3 69.5 72.7 35 5075 70 10150 140 20300 640 7.00

SAE 100 R15 High Pressure Hydraulic Rubber Hose

Construction

  • Tube: black, oil resistant, Neoprene (CR).
  • Reinforcement: Reinforcement: multiple spiral piles of heavy steel wire wrapped in alternating directions.
  • Cover: Cover: oil and weather resistant synthetic rubber.
  • Temperature: Temperature: -40 °C to +120 °C (-40 °F to +250 °F).
drawings of SAE 100R15-4 and SAE 100R14-6 hydraulic hoses.

HPH-11: Two types of SAE 100R15 high pressure hydraulic hoses.

A piece of SAE 100R15 hydraulic hoses show the section structure.

SAEH-12: SAE 100R15-4 hydraulic hose.

Table 6: SAE 100 R15 High Pressure Hydraulic Rubber Hose Technical Specification
Item Size SAE Size I.D. Reinforcement W.D. O.D. Max.W.P. Proof Pressure P.P. Min.B.P. Min.B.R. Weight
mm inch dash min. max. max. max. MPa psi MPa psi MPa psi mm kg/m
HPHR15-01 10 3/8 -6 9.3 10.1 20.3 23.3 42 6090 84 12180 168 24360 150 0.80
HPHR15-02 12.7 1/2 -8 12.3 13.5 24.0 26.8 42 6090 84 12180 168 24360 200 0.95
HPHR15-03 19 3/4 -12 18.6 19.8 32.0 36.1 42 6090 84 12180 168 24360 265 1.85
HPHR15-04 25 1 -16 25.0 26.4 38.9 42.9 42 6090 84 12180 168 24360 330 2.90
HPHR15-05 31.5 1-1/4 -20 31.4 33.0 48.4 51.5 42 6090 84 12180 168 24360 445 4.20
HPHR15-06 38 1-1/2 -24 37.7 39.3 56.3 59.6 42 6090 84 12180 168 24360 530 5.60
Four thermoplastic hydraulic hose with brass NPT fittings.

SAEH-13: Thermoplastic hydraulic hose 100R8 with NPT fittings.

Four high pressure hydraulic hose EN 853 1SN with stainless steel NPT fittings.

SAEH-14: High pressure hydraulic hose EN 853 1SN with NPT fittings.

Three high pressure hydraulic hose EN 856 4SN with stainless steel H type 90° bending.

SAEH-15: High pressure hydraulic hose EN 856 4SN with H type 90° bending.

Three high pressure hydraulic hose EN 856 4SP with stainless steel heavy duty H type fitting.

SAEH-16: High pressure hydraulic hose EN 856 4SP with heavy H type fitting.

When you contact us, please provide your detail requirements.

That will help us give you a valid quotation.